bnc connector造句

• I was looking at buying a VGA to BNC cable, but all of them have five BNC connectors; Why is this?
• The BNC connector is still in common use for coaxial cables that carry high frequency currents between pieces of electronics and communications equipment.
• Often, 75 ? BNC connectors are used, however these are not freely pluggable like MUSA connectors, due to the bayonet locking action.
• The network used Microsoft MS-Net server and client software, Zilog Z-Net network interface cards, coaxial cable and BNC connectors.
• To preserve compatibility with existing interlaced equipment, 480i composite video is always available via either a BNC connector, or a 3.5mm TRS connector.
• In 1992, a card with both BNC connectors for Ethernet was released, and in 1993, the first external Jetdirects were introduced with a parallel interface.
• As UTP is a balanced transmission line, a balun is needed to connect to unbalanced equipment, for example any using BNC connectors and designed for coaxial cable.
• I want to transmit video over some cat5 with a BNC, will I be able to do this, or are all five BNC connectors needed for this?
• Additionally, the URM-25's have a BNC connector for constant 200 mV output that can be connected to a frequency meter to display frequency accurately.
• RG-58 cable is often used as a generic carrier of signals in laboratories, combined with BNC connectors that are common on test and measurement equipment such as oscilloscopes.
• The HD-BNC connector uses the same " push and turn " interface of a traditional BNC, providing tactile feedback and a positive lock for quick and guaranteed mating.
• The basis for the development of the BNC connector was largely the work of Octavio M . Salati, a graduate of the Moore School of Electrical Engineering of the University of Pennsylvania.
• AES10-2003 recommends using BNC connectors with coaxial cables ( see part 7.1 . 4 ) and ST1 connectors with optic fibres ( see part 7.2 . 1 ).
• While working at Hazeltine Corporation, Dr . Salati was awarded United States patent # 2, 540, 012 which was the basis for what is now commonly known as the BNC connector.
• DS3 signals are rare except within buildings, where they are used for interconnections and as an intermediate step before being coax cables ( 1 for send and 1 for receive ) with BNC connectors on the ends.
• Several classes of electrical cable connectors, including ST connectors . ( The BNC connector is not exactly as described in this article, as the male, not female, connector has the slots and spring .)
• The HD-BNC ( High Density BNC ) . connector was developed by Amphenol and delivers 50 or 75 ohm performance in a footprint 51 % smaller than the traditional BNC connector, allowing four times the connector density.
• To avoid some of the drawbacks with 10BASE2 over BNC connectors, the EAD socket was one of several alternatives developed to give an " office friendly " network connector that could easily be connected and disconnected, and avoided the risk of making misconnections.
• The LEMO 00, a miniature push-pull 50 modular electronics standards used in instrumentation for nuclear and particle physics, where it is used as a replacement for BNC connectors in high density designs ( because the LEMO connector is much smaller in size than a BNC ).